Solar shading on the patio

Controls

Griesser and weinor have a long history together. In 1991, the Griesser Group acquired a majority stake in weinor, laying the foundations for a strong and globally active partnership.

* These products can be obtained exclusively through the Griesser Team and our expert specialist retailers.
Expert specialist retailers receive specific product training and provide you with the assurance that your installation will be carried out professionally.

External venetian blinds
- All metal external venetian blind
  - Metalunic Sinus *
  - Metalunic *
- External venetian blind with metal joints
  - Grinotex Sinus *
  - Grinotex *
- External venetian blind with profile slats
- External venetian blind with flat slats
  - Aluflex
- External venetian blind with beaded slats
  - Solomatic
  - Solomatic System
Facade awnings
- Zip - Vertical awning
  - Solozip *
- Vertical awning
  - Soloscreen
- Internal roller blinds
  - Soloroll
Window shutters
- Sliding
- Wing
Rolling shutters
- Built-in rolling shutter
  - Minicolor
  - Alucolor
  - Rolpac *
  - Tradi PUR
- Front-mounted rolling shutter
  - Renobloc
  - Reno Integro
Textile patio roofs
- Conservatory awnings
  - WGM Top
Controls
- Radio controls
  - BiLine
- KNX
  - KNX
- Master control
  - Easy Tec
- Sensors
  - Sensors, operation and accessories

Window shutters

Products

Wing shutters with window frame from Griesser

Description

The window frame system for rapid and easy installation at the construction site. The window frame surrounds the window opening; on three sides in the standard version. The wings are pre-mounted together with the selected armature at the factory where we use our proven SystemFix mounting system. Attach the window frame on the window, fit the wing shutters and you're done! And all of that in the familiar high quality and color selection from Griesser.

Contact

Send a message now

Any questions?
Call us.

+34 93 777 73 70

Documents

Bidding text

Window frame, wings with fixed slats, Model A

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with fixed slats 50 x 6 mm made of extruded aluminum, slats somewhat opened, one-part construction, optionally two to three-part construction with slats or filling Model C or CH, in accordance with valid brochure, installed in a stable, continuous 70 x 30 mm frame made of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with fixed, stacked slats, Model T

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with fixed, stacked slats 50 x 18 mm made of extruded aluminum, slats stacked on top of one another, light-tight, one-part construction, optionally two to three-part construction with slats or filling Model C or CH, in accordance with valid brochure, installed in a stable, continuous 70 x 30 mm frame made of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with fixed rhomboid slats, Model R

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with fixed rhomboid slats 60 x 6 mm made of extruded aluminum; slats slightly opened; single construction, optionally two to three-part construction with slats or filling Model C or CH, in accordance with valid brochure, installed in a stable, continuous 70 x 30 mm frame made of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with movable slats, Model B

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with movable slats 50 x 10 / 50 x 6 mm made of extruded aluminum, slats can be adjusted with an adjustment lever, one-part construction, optionally two to three-part construction with slats or filling Model A, C or CH, in accordance with valid brochure, installed in a stable, continuous 70 x 30 mm frame made of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with filling made of aluminum sheeting, Model C

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with filling made of 3 mm aluminum sheeting; single construction, optionally two or three-part construction with filling Model C; installed in a sturdy, continuous 70 x 30 mm frame of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with filling made of stacked aluminum profiles, Model CH

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with stacked profiles 100 x 18 mm of extruded aluminum, stacked horizontally, vertically or at an angle; single construction, optionally two to three-part construction with filling Model CH; installed in a sturdy, continuous 70 x 30 mm frame of extruded aluminum, powder-coated with surface in accordance with choice.



Window frame, wings with filling made of stacked aluminum profiles, Model F

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings of 23-mm, stacked profiles of extruded aluminum, stacked with vertical notch path, optionally with upper and lower or z-shaped frieze; single construction; installed in a narrow, continuous 21 x 30 mm frame of extruded aluminum; powder-coated with surface in accordance with choice.



Window frame, wings with filling made of stacked, filled aluminum profiles, Model G ISO

Window frame 67 x 14 mm; three-sided or, optionally, four-sided; exterior support on soffit; rabbet with integrated brush seal for panel support and rubber seal as insulation between masonry and architrave; frame of extruded aluminum profile, baked enamel with surface finishing from choice; armature according to description, baked enamel with surface finishing from choice; optional spacer for joined elements; armature includes hinges and baffle plates pre-installed according to diagram. Wings with 23 mm insulation core in sandwich construction, vertical notch path, optionally with upper and lower or z-shaped frieze; single construction, installed in a narrow, continuous 21 x 30 mm frame of extruded aluminum, powder-coated with surface in accordance with choice.

Mark text

Collections

Display all collections

The Griesser Colour World COLORS
PDF Download

Sun protection at the window